Shopping Cart

Thành Tiền 0đ
Tổng Tiền 0đ

TIDAL

TIDAL STEREO POWER AMPLIFIER INTRA

756,900,000đ
Thông số sản phẩm

THÔNG SỐ KỸ THUẬT: 

  • Chế độ chính: 2 kênh stereo. Mỗi bộ nguồn chỉ cấp nguồn cho một kênh để có hiệu suất tốt nhất:

    - 2 x 340W ở 8 ohm
    - 2 x 670W ở 4 ohm

  • Chế độ stereo bi-amping: mỗi bộ nguồn cung cấp năng lượng cho hai kênh.

    - 4 x 290W ở 8 ohm
    - 4 x 540W ở 4 ohm

  • Chế độ dual mono để khuếch đại LF: Chế độ BTL trên mỗi mô-đun stereo cho các ứng dụng tần số thấp, chẳng hạn như đối với công nghệ TIDAL LPX để kích hoạt âm trầm của loa TIDAL.

    - 2 x 1.180W 8 ohm
    - 2 x 1.830W 4 ohm

  • Bộ khuếch đại đầu ra hoàn toàn rời rạc với công nghệ class-A và âm tầng đầu ra class-D

  • Đường dẫn tín hiệu hoàn toàn DC từ đầu vào đến đầu ra (không có capacitor trong toàn bộ đường dẫn tín hiệu)

TIDAL STEREO POWER AMPLIFIER INTRA

756,900,000đ

TIDAL MONOBLOCK POWER AMPLIFER FERIOS

2,378,000,000đ
Thông số sản phẩm

THÔNG SỐ KỸ THUẬT: 

  • true mono reference power amplifier with linear power supply

  • pure silver hollow conductor EMI transformers
  • regulated active power supply with 2 x 800VA non-noise toriod transformers, completetly magnetical shielded and mechanical decoupled

  • linear voltage power supply for ripple-free voltage and current stabilization for the two amplifier modules

  • 410.000 µF stabilisation capacity, ultra fast response with high-grade-long-life-capacitors

  • elimination of deleterious resonances by all massive aluminum parts and braces inside, excellent torsional and longitudinal rigidity

  • in-house made multilayer PCB (printed circuit board) with 105 µm copper per layer

  • hand selected transistors, measured and matched with a precision better than 1%

  • DC-coupled input circuit, without coupling capacitors or relay in the signal path from the input to the output

  • ultralow impedance capacitors directly at the transistors for most shortest connection

  • TIDAL proprietary APM system (amplifier protection management) is completely outside of the signal path

  • TIDAL APM System is an isolated and completely autarkic system to manage and control the power amps safety: output current in relation to output-voltage, short circuit current, DC- offset, under-voltage and over-voltage

  • optional: fully autarcic working active crossover LPX-monomodule for active amping to control the bass section of TIDAL reference speakers, perfectly matched in phase and frequency, different frequencies and level adjustable to trim bass response perfectly to each room and/or taste

  • intelligent softstart system, remote power on/off by TIDAL pre amplifiers via RJ45 ethernet cable

  • rated power output at 8 ohm: 1 x 300 watts continuous rms power

  • rated power output at 4 ohm: 1 x 580 watts continuous rms power

  • rated power output at 2 ohm: 1 x > 700 watts continuous rms power

  • bandwith: 1Hz - 400 kHz (-3 dB), measured with impedance load

  • dimensions: W17.3" x H12.4" x D17,3" / W44 cm x H31 cm x D40 cm

  • power consumption: < 1 W in stand-by mode

  • damping factor: ideal damping factor for life like music reproduction, perfectly even over the whole spectrum

  • weight: 49 Kg / 109 lbs. (packaging excluded)
Khuyến mãi


TIDAL MONOBLOCK POWER AMPLIFER FERIOS

2,378,000,000đ