Model Name | TEAC AI-503 |
Speaker outputs |
|
Maximum output | 60W + 60W (4Ω 1kHz, 10%, JEITA) 30W + 30W (8Ω 1kHz, 10%, JEITA) |
Rated output | 43W + 43W (4Ω 1kHz, 1%, JEITA) 22W + 22W (8Ω 1kHz, 1%, JEITA) |
Allowable speaker impedance | 4Ω to 8Ω |
Total harmonic distortion | 0.005% (1kHz, 8Ω, 1W) |
S/N ratio | 100dB or more (analog input, when 8Ω load, rated output, A-weighted) |
Frequency response | 10Hz to 100kHz +1/-3dB (8Ω, 1W, analog input) |
PRE OUT audio outputs |
|
Connector | RCA × 1pair (L/R) |
Output impedance | 150Ω |
Frequency response | 10Hz to 100kHz +1/-3dB (analog input, when 200mVrms output) |
S/N ratio | 103dB or more (analog input, when 1kHz/2Vrms output, A-weighted) |
Distortion | 0.005% or less (analog input, when 1kHz/2Vrms output, 20kHz LPF) |
Headphone output |
|
Connector | 3.5mm 4-pole stereo mini jack |
Practical maximum output | 280mW + 280mW (GAIN set to HIGH, into 32Ω load, 10%) |
Compatible impedance range | 16 to 600Ω |
Analog audio inputs |
|
LINE 1 |
|
Connector | RCA × 1pair (L/R) |
Input impedance | 30kΩ |
Maximum input | 2Vms |
LINE 2 | * This is a combined analog(LINE 2) and optical(OPT 2) input connector. |
Connector | 3.5mm stereo mini jack |
Input impedance | 22kΩ |
Maximum input | 2Vms |
Digital audio inputs |
|
COAXIAL (COAX) |
|
Connector | RCA |
OPTICAL (OPT 1) |
|
Connector | Square (TOSLINK) |
OPTICAL (OPT 2) | * This is a combined analog(LINE 2) and optical(OPT 2) input connector. |
Connector | Round (-24.0 to -14.5dBmpeak) |
USB |
|
Connector | USB-B (USB 2.0 standard) |
PCM data sampling frequency |
|
COAXIAL | 32k/44.1k/48k/88.2k/96k/176.4k/192k Hz |
OPTICAL | 32k/44.1k/48k/88.2k/96k/176.4k/192k Hz |
USB | 44.1k/48k/88.2k/96k/176.4k/192k/352.8k/384k Hz |
Quantization bit depth |
|
COAXIAL | 16/24 bit |
OPTICAL | 16/24 bit |
USB | 16/24/32 bit |
DSD data sampling frequency |
|
COAXIAL | 2.8MHz (supported using 176.4kHz/24bit DoP transmission) |
OPTICAL | 2.8MHz (supported using 176.4kHz/24bit DoP transmission) |
USB | 2.8M/5.6M/11.2M Hz |
Bluetooth® |
|
Version | 4.0 |
Output class | Class 2 (approximate transmission distance : 10m) * The transmission distance is approximate. The transmission distance could vary depending on the surrounding environment and electromagnetic waves. |
Supported profiles | A2DP、AVRCP |
Supported A2DP codecs | SBC、AAC、Qualcomm® aptX™、LDAC |
A2DP content protection | SCMS-T |
Maximum number of stored pairings | 8 |
Power supply | AC 220 - 240V, 50/60Hz |
Power Consumption | 38W |
Standby power | 0.5W or less (in standby mode) |
Dimensions | 290(W) × 81.2(H) × 264(D)mm |
Net Weight | 3.7kg |
Operating Temerature | 5˚C to 35˚C |
Operating humidity range | 5% to 85% (no condensation) |
Storage Temerature | -20˚C to 55˚C |
Accessories | Power cord, Remote control(RC-1328), Batteries for remote control(AAA) × 2, Owner's manual (this document, including warranty) |