Shopping Cart

Thành Tiền 0đ
Tổng Tiền 0đ

OCTAVE AUDIO

OCTAVE V 70 CLASS A

290,000,000đ
Thông số sản phẩm

THÔNG SỐ KỸ THUẬT : 

Công suất đầu ra:

2 x 50 W(Liên tục); 2 x 70 W(Tối đa)
Trở kháng 4 Ohms

Trở kháng tối ưu: 

4-16 Ohms

Phản hồi thường xuyên:

20 Hz - 70 kHz @ 50 W - 1 / -3 dB

Méo hài tổng:

<0,1%

Tỷ lệ tín hiệu trên tiếng ồn:

- 100 dB / 50 W

Cấu hình bóng:

1 x ECC 83; 2 x ECC 81; 4 x KT120

Kết nối:

Đầu vào: 5 x RCA; 1 x RCA(Bypass); 1 x XLR
Đầu ra: 1 x RCA(Rec Out); 1 x RCA(Pre-Out)

Tiêu thụ điện năng:

<20 W ECO Mode, 190 W ở chế độ chờ, 500 W toàn bộ nguồn

Cân nặng:

23Kg

Kích thước:

451 x 175 x 405 mm (Rộng x Cao x Sâu)

OCTAVE V 70 CLASS A

290,000,000đ

OCTAVE V40SE

137,500,000đ
Thông số sản phẩm

THÔNG SỐ KỸ THUẬT :

Power Output
2 x 40 Watt into 4 Ohm

invi

Frequency Response
20 Hz – 70 kHz @ 40 W -1 / -3 dB
5 Hz – 70 kHz @ 10 W -0 / -2 dB

invi

Total Harmonic Distortion
< 0,1% @ 10 Watt into 4 Ohm

invi

Signal-to-Noise Ratio
-110 dB / 40 W

invi

Noise / Ripple
< 300 μV

invi

Optimum Speaker Impedance
3 – 16 Ohm

invi

Minimum Speaker Impedance
2 Ohm

invi

No-load current
28 mA - BIAS low, 34 mA - BIAS high

invi

Connections

Inputs: 4 x Line Level (Cinch)

Outputs:1 x Tape

Pre-Out and Main-In



Features

ECO Mode, Bias Adjustment, Power Management



Configuration

Push Pull Pentode Circuit
Negative Grid Voltage adjustable for each tube
with 3 turn Precision Regulators,
Wideband Output Transformers using Silicon steel PMZ Core,
single Impedance Output,
Optimum Load Impedance 3 - 10 Ohm
Nominal Speaker Impedance,
Effieciency greater than 85dB,
Amplifier remains stable with
No Load and Output short circuited


Power Consumption
350W


Weight
18,6 kg

Standard Accessory
Power Cord, 3 mm Screwdriver, IR-Remote Control

Main Fuse
230/240 V mains: 2,5 A slow-blow type H

OCTAVE V40SE

137,500,000đ

OCTAVE V 70 SE

182,500,000đ
Thông số sản phẩm

THÔNG SỐ KỸ THUẬT : 

Công suất đầu vào 2 x 110 W continuous, 130 W Peak into 4 Ohm
 Tần số phản hồi 20 Hz - 70 kHz @ 90 W - 1 / -3 dB,
 5 Hz - 70 kHz @ 10 W - 0 / - 2 dB
 Total Harmonic Distortion < 0,1% @ 10 W into 4 Ohm
 Signal-to-Noise Ratio - 110 dB / 90 W
 Optimal Load Impedance 3 - 16 Ohms
 Minimum Load Impedance 2 Ohms
 Connections Inputs: 5 x Line Level / RCA,1 x Bypass-Function / RCA
 1 x Phono optional / RCA
 1 x XLR Input
 Outputs: 1 x Rec Out / RCA, Pre-Out adjustable / RCA
 Features ODT / Octave Dynamic Technologies, ADF / Adjustable Damping Factor, ECO Mode, Bias   Adjustment, Power Management
 Preamplifier
 Input Sensitivity / MED 270 mV RCA
 Input Impedance 50 kOhm / RCA, 25kOhm / XLR
 Left/Right Crosstalk 55 dB
 Input to Input Crosstalk - 105 dB
 Output Impedance Pre Out 240 Ohm
 Max. Level Pre Out 5 V eff.
 Tube Complement Preamplifier
 LOW 1 x ECC 82, 2 x ECC 81
 MEDIUM 1 x ECC 81, 2 x ECC 81
 HIGH 1 x ECC 83, 2 x ECC 81
 Gain
 LOW/MED/HIGH
 34dB / 37 dB / 38 dB

 Damping factor

 LOW/MED/HIGH

 5 / 7,2 / 10
 General Facts
 Power Comsumption < 20 W Ecomode, 190 W idle, 500 W @ full power 
 Weight 22,70 kg 
 Standard Accessory Power cord, 3 mm screwdriver, IR-Remote Control, Allen key for removing the cover 
 Main Fuse 230/240 V main: 4 A slow-blow type H

OCTAVE V 70 SE

182,500,000đ

OCTAVE V80SE

325,000,000đ
Thông số sản phẩm

THÔNG SỐ KỸ THUẬT : 

Công suất đầu ra 2 x 120 W continuous, 150 W Peak into 4 Ohm
 Tần số phản hồi 10 Hz - 80 kHz
 Total Harmonic Distortion < 0,1% @ 10 W into 4 Ohm
 Signal-to-Noise Ratio > 100 dB
 Trọng tải loa tối thiểu 2 Ohm
 Kết nối Inputs: 5 x Line Level RCA, 1 x Phono optional,
 1 x XLR Input,
 Outputs:1 x Rec,
 Pre-Out and Main-In, Master In and Master Out
 Đặc tính ECO Mode, Bias Adjustment, Power Management
 Preamplifier
 Input Sensitivity 300 mV RCA + XLR
 Trở kháng đầu vào 40 kOhm RCA; 25 kOhm XLR
 Channel Balance 0,5 dB bis - 70 dB from Volumeadjuster
 Left/Right Crosstalk 60 dB
 Input to Input Crosstalk -105 dB
 Gain Pre-Out +6 dB
 Phono
 Trở kháng đầu vào MC 500 Ohm, MM 47 kOhm
 Signal-to-Noise Ratio MC 75 dB, MM 90 dB
 Input Sensitivity MC 0.5 mV, MM 4 mV
 Subsonic Filter -12dB/ Oct. 20Hz corner frequency
 General Facts
 Công suất tiêu thụ < 30 W Ecomode, 180 W idle, 500 W at full power
 Trọng lượng 23 kg
 Phụ kiện tiêu chuẩn Power cord, 3 mm screwdriver, IR-Remote Control, Allen key for removing the cover
 Cầu chì chính 230/240 V Mains:: 4 A slow-blow type H

OCTAVE V80SE

325,000,000đ

OCTAVE V110SE

240,000,000đ
Thông số sản phẩm

THÔNG SỐ KỸ THUẬT :

Công suất đầu vào 2 x 110 W continuous, 130 W Peak into 4 Ohm
 Tần số phản hồi 20 Hz - 70 kHz @ 90 W - 1 / -3 dB,
 5 Hz - 70 kHz @ 10 W - 0 / - 2 dB
 Total Harmonic Distortion < 0,1% @ 10 W into 4 Ohm
 Signal-to-Noise Ratio - 110 dB / 90 W
 Optimal Load Impedance 3 - 16 Ohms
 Minimum Load Impedance 2 Ohms
 Connections Inputs: 5 x Line Level / RCA,1 x Bypass-Function / RCA
 1 x Phono optional / RCA
 1 x XLR Input
 Outputs: 1 x Rec Out / RCA, Pre-Out adjustable / RCA
 Features ODT / Octave Dynamic Technologies, ADF / Adjustable Damping Factor, ECO Mode, Bias   Adjustment, Power Management
 Preamplifier
 Input Sensitivity / MED 270 mV RCA
 Input Impedance 50 kOhm / RCA, 25kOhm / XLR
 Left/Right Crosstalk 55 dB
 Input to Input Crosstalk - 105 dB
 Output Impedance Pre Out 240 Ohm
 Max. Level Pre Out 5 V eff.
 Tube Complement Preamplifier
 LOW 1 x ECC 82, 2 x ECC 81
 MEDIUM 1 x ECC 81, 2 x ECC 81
 HIGH 1 x ECC 83, 2 x ECC 81
 Gain
 LOW/MED/HIGH
 34dB / 37 dB / 38 dB

 Damping factor

 LOW/MED/HIGH

 5 / 7,2 / 10
 General Facts
 Power Comsumption < 20 W Ecomode, 190 W idle, 500 W @ full power 
 Weight 22,70 kg 
 Standard Accessory Power cord, 3 mm screwdriver, IR-Remote Control, Allen key for removing the cover 
 Main Fuse 230/240 V main: 4 A slow-blow type H


OCTAVE V110SE

240,000,000đ