Shopping Cart

Thành Tiền 0đ
Tổng Tiền 0đ

AMPLY HI-END

ACCUPHASE E-700

Liên hệ
Thông số sản phẩm

Thông số kỹ thuật:

Phân loại: Ampli tích hợp 2 kênh

Kiểu mạch: Class A thuần

Công suất: 35W/8Ω, 70W/4Ω, 140W/2Ω, 160W/1Ω

Damping Factor: >1.000

S/N: 117dB

Méo hài tổng: <0,03%

Giải mã: DAC-60 (PCM 32bit/384kHz, DSD 11,2MHz)

Phono: AD-60 (MM và MC)

Công suất tiêu thụ: 178W

Kích thước: 465 x 191 x 428 mm

Khối lượng: 25,3kg.

Khuyến mãi


ACCUPHASE E-700

Liên hệ

DCS LINA HEADPHONE AMP

298,000,000đ
Thông số sản phẩm

THÔNG SỐ KỸ THUẬT:

Khuyến mãi


DCS LINA HEADPHONE AMP

298,000,000đ

TIDAL PRE-AMPLIFIER PRESENCIO

2,262,000,000đ
Thông số sản phẩm

THÔNG SỐ KỸ THUẬT: 

Phonodeck:

4 bộ nguồn điều chỉnh tuyến tính với 40 x 3.300 µF,

tổng dung lượng đệm và lọc 132,00 µF

Tăng điện áp: 50dB (tại 1kHz)

Tiếng ồn: >100dB (điện áp đầu vào 0,5mV)

Tổng số hài: < 0,005%

Trở kháng đầu vào: 50 ohm - 2.400 ohm

Kích thước (RxCxS): 44cm x 13cm x 39cm

Trọng lượng: 11 kg

sàn lót:

6 mô-đun bộ khuếch đại bị cô lập

8 bảng điều khiển âm lượng với 256

4 bộ nguồn điều chỉnh tuyến tính với 40 x 3.300 µF,

tổng dung lượng đệm và lọc 132,00 µF

Mức tăng điện áp: 12dB (tại đầu vào Line) hoặc 23 dB (tại đầu vào PHANODECK)

Tăng băng thông: 1Hz - 350kHz (-3dB)

Tổng số hài: < 0,001%

Độ ồn: > 100dB (điện áp đầu ra 0,5V)

Trở kháng đầu vào: 10k ohm

Trở kháng đầu ra: 50 / 150 ohm

Kích thước (RxCxS): 44cm x 13cm x 39cm

Trọng lượng: 11 kg

Bộ nguồn:

-cung cấp điện quy định với 6 máy biến áp

-cho 12 đầu ra điện áp khác nhau với 84 x 3.300 µF,

tổng dung lượng đệm và lọc 277.200 µF

-6 đầu ra từ xa để bật/tắt nguồn tuần tự bị trễ thời gian

Công suất tiêu thụ: 25W (đã cắm PHONDECK và LINEDECK)

Kích thước (RxCxS): 44cm x 13cm x 39cm

Trọng lượng: 14 kg

Khuyến mãi


TIDAL PRE-AMPLIFIER PRESENCIO

2,262,000,000đ

Amplifier Integrated MBL N51

477,900,000đ
Thông số sản phẩm

THÔNG SỐ KỸ THUẬT: 

Inputs2 x CD (RCA) 2 x AUX (RCA) 1 x Pass-Through (RCA) 1 x XLR 1 x optional phono 1 x optional 2nd XLR
Outputs1 x Preamplifier (RCA) 1 x Fixed Out / Record Out (RCA) 2 Pairs of loudspeaker terminals
Other Inputs/OutputsMBL SmartLink SD slot für updating Ground terminal for phono
Ampilifier sectionMBL LASA 2.0
Music power2 x 620 W (2 Ω) 2 x 380 W (4 Ω) 2 x 210 W (8 Ω)
Output currentMax. 28 ampere
Weight27 kg / 59.5 Ibs

Amplifier Integrated MBL N51

477,900,000đ

Amplifier Integrated MBL C51

252,450,000đ
Thông số sản phẩm

THÔNG SỐ KỸ THUẬT: 

General
Weight 23 kg / 50.7 lbs
Dimensions (without cables)
W 45,0 cm / D 44,5 cm / H 14,5 cm
W 17.7 in / D 17.5 in / H 5.7 in
Dimensions with packaging
W 59,0 cm / D 54,0 cm / H 35,5 cm
W 23.2 in / D 21.3 in / H 21.9 in
Line Voltage 230 Vac / 50 Hz or 115 Vac / 50/60 Hz (single voltage, factory setting depending on country)
Power consumption
 in stand by :  < 0.5 VA
 in idle : < 70 VA
 Maximum  : < 1000 VA (w. 2 x 300 W @ 4 Ohm)

Connections
Inputs
RCA unbalanced 2 x MBL CD1 / CD2 , 2 x Tuner AUX1 / AUX2 , 1 x Processor By-Pass
XLR balanced (unity gain) 1 x Symmetrical
Options 1 x optional 2nd Symmetrical In (XLR) or
1 x optional Phono Module (RCA)

Outputs
RCA unbalanced 1 x Variable Out , 1 x Fixed Record Out
Loudspeaker 1 x pair Loudspeaker Binding Posts
Other Ground Terminal , 2 x MBL SmartLink

Preamplifier Section
Output Level / Maximum Output
Variable unbalanced RCA Outputs
0 … 5 V @ 2 V Input, max 1.7 V *1(According to Volume Setting)
*1: Input Voltage for Rated Power
Fixed Record Output 2 V @ 2 V Input, max. 8 V
Nominal / Maximum Input Level (All Inputs except Phono)
2 V / 8V (According to Volume Setting)
Absolute Polarity In-Phase (RCA / XLR Pin2)
Frequency Range (All Inputs and Outputs except Phono) DC - > 200 kHz

Output Impedance
All RCA Outputs 100 Ohm

Input Impedance
 CD and Processor By-Pass Inputs ≥ 5 kOhm
 AUX Inputs 50 kOhm
 XLR Input 10 kOhm
Signal to Noise Ratio (All Inputs and Outputs except Phono)
> 110 dB (A) @ 2 V Input, Volume set to 0 dBr / unity gain
Channel Separation (All Inputs and Outputs except Phono)
> 100 dB @ 1 kHz
Total Harmonic Distortion + Noise (All Inputs and Outputs except Phono)
< 0.001 % @ 2V Input / 1kHz, Volume set to 0 dBr / unity gain

Power Amplifier Section
Rated Power
   Stereo 4 Ohm  2 x 300 W
   Stereo 8 Ohm  2 x 180 W
   Stereo 2 Ohm  2 x 400 W
Peak Output Voltage 62 Vp
Peak Output Current 20 Vp
Input Sensitivity (RCA / XLR) 100 mV for 1 W @ 4 Ohm
Rated Input Voltage (RCA / XLR) 1.70 V for 300 W @ 4 Ohm
Voltage Gain 20 (26 dB)
Absolute Polarity In-Phase
Signal / Noise Ratio @ Rated Output 122 dB (A) @ 300 W / 4 Ohm
Signal / Noise Ratio @ 1 Watt 98 dB (A) @ 1 W / 4 Ohm
Equivalent Input Noise 124 dB (A) @ 2 V Input
Frequency Response < 10 Hz – 45 kHz
Distortion THD+N Typ. 0.01 % @ 3 W from 20 Hz … 20 kHz
Damping Factor > 100 (40 dB) @ 1 kHz / 4 Ohm
Channel Separation > 90 dB @ 1 kHz

Amplifier Integrated MBL C51

252,450,000đ

McIntosh MA12000-AN Anniversary Edition

475,000,000đ
Thông số sản phẩm
+Giá tham khảo: 475,000,000 đ / chiếc
+Standard: 442,000,000 đ / chiếc

THÔNG SỐ KỸ THUẬT: 

Công suất: 350W / kênh (2, 4, 8 ohm)

Độ động: 1.5dB

Đáp tuyến tần số:

+0, -0.5dB từ 20Hz đến 20kHz

+0, -3dB từ 10Hz đến 100kHz

Méo hài âm tổng:

Pre-amplifier: 0.03%

Amplifier: 0.005%

Ngõ vào:

  • XLR x 02

  • RCA x 06

  • Phono MM x 01

  • Phono MC x 01

  • Coaxial x 02

  • Optical x 02

  • USB x 01

  • MCT x 01

  • HDMI-ARC x 01

Số kênh: 02

Kích thước (W x H x D): 44.5cm x 24cm x 55.88cm

Trọng lượng: 48.9kg

Khuyến mãi


McIntosh MA12000-AN Anniversary Edition

475,000,000đ

Amply Luxman SQ-N150

Liên hệ
Thông số sản phẩm

THÔNG SỐ KỸ THUẬT:

Rated output10W+10W(6Ω)
Input sensitivity/
input impedance
PHONO (MM): 3.0mV/47kΩ
PHONO (MC): 0.33mV/100Ω
LINE: 180mV/47kΩ
Frequency responsePHONO: 20Hz to 20kHz (±0.5dB)
LINE: 20Hz to 80kHz (within -3.0dB)
Total harmonic distortion1% or less (1kHz, 10W/6Ω)
S/N ratio (IHF-A)PHONO (MM): 84dB or more
PHONO (MC): 64dB or more
LINE: 95dB or more
CircuitDriver :P-K split phase inversion circuit
Output :Pentode power tubes
Vacuum tubesECC83×2, EL84×4
Power supply230V~(50Hz) / 115V~(60Hz)
Power consumption98W
External dimensions297(W) x 188(H) x 251(D) mm
20mm front panel knob of and 21mm rear panel
terminals are included in the depth measurement
Net weight12.4kg (main unit)
AccessoriesRemote control (RA-25), Power cable

Amply Luxman SQ-N150

Liên hệ

Amply Luxman CL-38uC

128,000,000đ
Thông số sản phẩm

THÔNG SỐ KỸ THUẬT: 

Input sensitivity/
input impedance
PHONO (MM): 2.0mV/47kΩ
PHONO (MC high): 0.3mV/100Ω
PHONO (MC low): 0.08mV/30Ω
LINE: 190mV/50kΩ
BAL.LINE: 190mV/20kΩ *2
Output/output impedanceRated 1V/300Ω
Frequency responsePHONO: 20Hz to 20kHz (±0.5dB)
LINE/BAL.LINE: 10Hz to 70kHz (within -3.0dB)
Total harmonic distortion0.006% or less (1kHz)
0.06% or less (20Hz to 20kHz)
S/N ratio (IHF-A)PHONO (MM): 68dB or more
PHONO (MC high): 63dB or more
PHONO (MC low): 60dB or more
LINE/BAL.LINE: 100dB or more
Tone control±8dB, selectable frequency range
BASS: 150/300/600Hz,
TREBLE: 1.5k/3k/6kHz
Low cut30Hz(-6dB/oct.)
CircuitSRPP
Vacuum tubesECC83S×3, ECC82×5
Power supply230V~(50Hz)/115V~(60Hz)
Power consumption35W
External dimensions440(W) x 169(H) x 307(D) mm
19mm front panel knob of and 12mm rear panel
terminals are included in the depth measurement
Net weight13.3kg (main unit)
AccessoriesRemote control (RA-19), Power cable
Khuyến mãi


Amply Luxman CL-38uC

128,000,000đ

Amply Luxman MQ-88uC

Liên hệ
Thông số sản phẩm

THÔNG SỐ KỸ THUẬT:

Rated output25W + 25W (4Ω, 8Ω, 16Ω)
Input sensitivity890mV/25W
input impedance32kΩ
Frequency response20Hz to 20kHz (+0, -0.5dB)
10Hz to 100kHz (+0, -3.0dB)
Total harmonic distortion0.1% (1kHz/1W)
0.5% (20Hz to 20kHz/1W)
S/N ratio (IHF-A)105dB
CircuitDriver: Mullard, Output tubes: Triode connection
Vacuum tubesECC83S×2, ECC82×2, KT88×4
Power supply230V~(50Hz)/115V~(60Hz)
Power consumption170W, 140W (under no signal)
External dimensions440(W) x 184(H) x 230(D) mm
17mm front panel knob of and 28mm rear panel
terminals are included in the depth measurement
Net weight16.1kg (main unit)
AccessoriesPower cable
Speaker terminal Supported Y-lug terminal dimensionWidth of part a: 14.5mm or less
Width of part b: 7.5mm or more
*Connection may be difficult
depending on the shape of the Y-lug terminal.

Amply Luxman MQ-88uC

Liên hệ

Amply Luxman LX-380

168,000,000đ
Thông số sản phẩm

THÔNG SỐ KỸ THUẬT: 

Rated output20W + 20W (6Ω), 18W + 18W (8Ω), 14W + 14W (4Ω)
Input sensitivity/input impedance (PRE OUT :1V)PHONO (MM): 3.0mV/47kΩ
PHONO (MC): 0.38mV/100Ω
LINE: 180mV/47kΩ, MAIN-IN: 690mV/100kΩ
Output voltageRECOUT: 180mV, PRE OUT: 1V
Frequency responsePHONO: 20Hz to 20kHz (±0.5dB)
LINE: 20Hz to 80kHz (+0, -3.0dB)
Total harmonic distortion1% or less (6Ω, 1kHz)
S/N ratio (IHF-A)PHONO (MM): 84dB or more
PHONO (MC): 67dB or more
LINE: 95dB or more
Volume adjustmentLECUA
CircuitDriver: Mullard, Output: beam tetrode connection
Vacuum tubes6L6GC×4, ECC82×3
Output configurationPush-pull
Max. amount of tone control±8dB, turnover frequency switch-over system
BASS: 150 / 300 / 600Hz, TREBLE: 1.5k / 3k / 6kHz
Power supply230V~(50Hz) / 115V~(60Hz)
Power consumption127W
External dimensions440(W) x 197(H) x 403(D) mm
front side knob of 25mm and rear side terminal
of 28mm included in depth
Net weight17.6kg (main unit)
AccessoriesRemote controller (RA-25)
Power cable
Speaker terminal Supported Y-lug terminal dimensionWidth of part a: 15mm or less
Width of part b: 8mm or more
* Connection may not be performed
depending on the shape of the
Y-lug terminal.
Khuyến mãi


Amply Luxman LX-380

168,000,000đ

Amply Luxman MQ-300

Liên hệ
Thông số sản phẩm

THÔNG SỐ KỸ THUẬT: 

Rated output8W + 8W (4Ω, 8Ω,16Ω)
Input sensitivity490mV (8Ω)
Input impedance240kΩ
Frequency response20Hz to 20kHz (+0.3,-1.5dB)
10Hz to 30kHz (+0.3, -3.0dB)
Total harmonic distortion1% (1kHz, 8Ω, 1W)
S/N ratio (IHF-A)105dB
Circuiting systemDriver: Parallel connection two stage amplification
Output: Single configuration, cathod-bias circuit
Whole: Non-feedback amplification
Vacuum tubes5AR4(SOVTEK) x 2
6SN7GTB(TUNG-SOL) x 4
TA-300B(Takatsuki) x 2
Power voltage230V~(50Hz) / 115V~(60Hz)
Power consumption190W
190W (at no input)
External dimensions460(W) x 237(H) x 340(D) mm
rear side terminal of 36mm included in depth
Net weight29.0kg (main unit)
AccessoriesPower cable
Speaker terminal Supported Y-lug terminal dimensionWidth of part a: 16mm or less
Width of part b: 7mm or more
* Connection may not be performed
depending on the shape of the
Y-lug terminal.

Amply Luxman MQ-300

Liên hệ

Amply Luxman M-10X

488,000,000đ
Thông số sản phẩm

THÔNG SỐ KỸ THUẬT: 

Rated output150W + 150W (8Ω)/at stereo
300W + 300W (4Ω)/at stereo
600W (8Ω)/at monaural
Instantaneous max. output1,200W + 1,200W (1Ω)/at stereo
2,400W (2Ω)/at monaural
Input sensitivity1.24V/150W (8Ω)
GAIN 29.0dB
Input impedanceUnbalanced 51kΩ
Balanced 28kΩ
Frequency response20Hz to 20kHz (+0, -0.1dB)
1Hz to 130kHz (+0, -3.0dB)
Total harmonic distortion0.003% or less (1kHz/8Ω)
0.04% or less (20Hz to 20kHz/8Ω)
S/N ratio (IHF-A)117dB
Amplification feedback circuitLIFES 1.0
Output configuration3 stage Darlington 4 paralleled push-pull
Damping factor600
Power consumption540W
290W (under no signal)
1.0W (at standby)
External dimensions440(W) x 224(H) x 488(D) mm
front side knob of 2mm and rear side terminal
of 38 mm included in depth
Net weight48.4kg
AccessoriesTrigger cable (Modular/3.5mm Monaural)
Power cable
Speaker terminal
Supported Y-lug terminal
dimension
Width of part a: 15mm or less
Width of part b: 8mm or more
* Connection may not be performed
depending on the shape of the
Y-lug terminal.
Khuyến mãi


Amply Luxman M-10X

488,000,000đ

Amply Luxman L-509Z

Liên hệ
Thông số sản phẩm

THÔNG SỐ KỸ THUẬT: 

Rated output120W + 120W (8Ω)
220W + 220W (4Ω)
Input sensitivity/
input impedance
PHONO (MM): 2.5mV/47kΩ
PHONO (MC-H): 0.3mV/100Ω
PHONO (MC-L): 0.1mV/40Ω
LINE: 180mV/47kΩ
BAL.LINE: 180mV/79kΩ
MAIN IN: 1.1V/47kΩ
Output voltagePRE OUT: 1V
Frequency responsePHONO: 20Hz to 20kHz (±0.5dB)
LINE: 20Hz to 100kHz (within -3dB)
Total harmonic distortion0.007% or less (8Ω, 1kHz)
0.03% or less (8Ω, 20Hz to 20kHz)
S/N ratio (IHF-A)PHONO (MM): 87dB or more
PHONO (MC-H): 70dB or more
PHONO (MC-L): 62dB or more
LINE: 106dB or more
Volume adjustmentLECUA-EX
Amplification feedback circuitLIFES 1.0
Output configurationBipolar 4-parallel push-pull
Damping factor330
Max. amount of tone controlBASS: ±8dB at 100Hz
TREBLE: ±8dB at 760Hz
TREBLE: ±8dB at 10kHz
Power supply230V~(50Hz) / 115V~(60Hz)
Power consumption390W
150W (under no signal), 0.5W (at standby)
External dimensions440(W) x 193(H) x 463(D) mm
front side knob of 20mm and rear side terminal
of 37mm included in depth
Net weight29.4kg (main unit)
AccessoriesRemote control (RA-17A)
Power cable
Speaker terminal
Supported Y-lug terminal
dimension
Width of part a: 16mm or less
Width of part b: 7mm or more
* Connection may not be performed
depending on the shape of the
Y-lug terminal.

Amply Luxman L-509Z

Liên hệ

Amply Luxman L-507Z

218,000,000đ
Thông số sản phẩm

THÔNG SỐ KỸ THUẬT: 

Rated output110W+110W(8Ω)
220W+220W(4Ω)
Input sensitivity/
input impedance
PHONO(MM): 2.5mV / 47kΩ
PHONO(MC ): 0.3mV / 100Ω
LINE: 180mV / 47kΩ
BAL.LINE: 180mV / 79kΩ
MAIN IN: 1.05V / 47kΩ
Output voltagePRE OUT: 1V
Frequency responsePHONO: 20Hz to 20kHz (±0.5dB)
LINE: 20Hz to 100kHz (within -3dB)
Total harmonic distortion0.007% or less (8Ω, 1kHz)
0.03% or less (8Ω, 20Hz to 20kHz)
S/N ratio (IHF-A)PHONO (MM): 91dB or more
PHONO (MC): 75dB or more
LINE: 105dB or more
Volume adjustmentNew LECUA1000
Amplification feedback circuitLIFES 1.0
Output configurationBipolar 3-parallel push-pull
Damping factor300
Max. amount of tone controlBASS: ±8dB at 100Hz
TREBLE: ±8dB at 10kHz
Power supply230V~(50Hz) / 115V~(60Hz)
Power consumption350W
886W (under no signal), 0.4W (at standby)
External dimensions440(W) x 178(H) x 454(D) mm
front side knob of 20mm and rear side terminal
of 27mm included in depth
Net weight25.4kg (main unit)
AccessoriesRemote control (RA-17A)
Power cable
Speaker terminal
Supported Y-lug terminal
dimension
Width of part a: 15mm or less
Width of part b: 8mm or more
* Connection may not be performed
depending on the shape of the
Y-lug terminal.
Khuyến mãi


Amply Luxman L-507Z

218,000,000đ

Amly Luxman L-595ASE

308,000,000đ
Thông số sản phẩm

THÔNG SỐ KỸ THUẬT: 

Rated output30W + 30W (8Ω),
60W + 60W (4Ω)
Input sensitivity /
input impedance
PHONO (MM) : 2.5mV / 47kΩ
PHONO (MC) : 0.3mV / 100Ω
LINE : 180mV / 47kΩ
BAL.LINE : 180mV / 55kΩ
MAIN IN : 550mV / 47kΩ
Output voltage / output impedancePRE OUT: 1V / 600kΩ
Frequency responsePHONO: 20Hz to 20kHz (±0.5dB)
LINE: 20Hz to 100kHz (within -3.0dB)
Total harmonic distortion0.007% or less (8Ω, 1kHz)
0.06% or less (8Ω, 20Hz to 20kHz)
S/N ratio (IHF-A)PHONO (MM) : 91dB or more
PHONO (MC) : 75dB or more
LINE : 105dB or more
Volume adjustmentNew LECUA1000
Amplification circuitODNF-u
Output configurationBipolar 3-parallel push-pull
Damping factor370
Max. amount of tone controlBASS: ±8dB at 100Hz
TREBLE: ±8dB at 10kHz
Power supply230V~(50Hz) / 115V~(60Hz)
Power consumption330W,
230W (under no signal), 0.4W (at standby)
External dimensions440 (W) x 193 (H) x 462 (D) mm
front side knob of 19mm and rear side terminal of 36mm included in depth
Net weight29.0kg (main unit)
AccessoriesRemote control (RA-17A)
Speaker terminal Supported Y-lug terminal dimensionWidth of part a: 16mm or less
Width of part b: 7mm or more
* Connection may not be performed depending on the shape of the Y-lug terminal.

* Setting the phase inverter switch to the B position allows balance input terminal No 2 to change to HOT, and No. 3 to COLD.

* Volume mute, monaural and subsonic functions can be turned on and off with remote control

* Specifications and appearance are subject to change without notice.

* The products listed in this catalog do not include line cables. Please purchase cables separately.

Khuyến mãi


Amly Luxman L-595ASE

308,000,000đ

Amply Luxman L-590AXII

218,000,000đ
Thông số sản phẩm

THÔNG SỐ KỸ THUẬT : 

Rated output30W + 30W (8Ω), 60W + 60W (4Ω)
Input sensitivity/input impedancePHONO (MM): 2.5mV/47kΩ
PHONO (MC): 0.3mV/100Ω
LINE: 180mV/47kΩ
BAL.LINE: 180mV/55kΩ
MAIN-IN: 550mV/47kΩ
Output voltageRECOUT: 180mV, PRE OUT: 1V
Frequency responsePHONO: 20Hz to 20kHz (±0.5dB)
LINE: 20Hz to 100kHz (+0, ±3.0dB)
Total harmonic distortion0.005% or less (8Ω, 1kHz)
0.02% or less (8Ω, 20Hz to 20kHz)
S/N ratio (IHF-A)PHONO (MM): 91dB or more,PHONO (MC): 75dB or more
LINE: 107dB or more
Volume adjustmentNew LECUA1000
Amplification circuitODNF 4.0
Output configurationBipolar 3-parallel push-pull
Damping factor320
Max. amount of tone controlBASS: ±8dB at 100Hz
TREBLE: ±8dB at 10kHz
Power supply230V~(50Hz) / 115V~(60Hz)
Power consumption330W
260W (under no signal), 0.5W (at standby)
External dimensions440(W) x 193(H) x 463(D) mm
front side knob of 20mm and rear side terminal of 37mm included in depth
Net weight28.4kg (main unit)
AccessoriesRemote controller (RA-17A)
Power cable
Speaker terminal Supported Y-lug terminal dimensionWidth of part a: 16mm or less
Width of part b: 7mm or more
* Connection may not be performed
depending on the shape of the
Y-lug terminal.
Khuyến mãi


Amply Luxman L-590AXII

218,000,000đ

Amply Luxman L-550AXII

148,000,000đ
Thông số sản phẩm

THÔNG SỐ KỸ THUẬT:

Rated output20W + 20W (8Ω), 40W + 40W (4Ω)
Input sensitivity / input impedancePHONO (MM): 2.5mV/47kΩ
PHONO (MC): 0.3mV/100Ω
LINE: 180mV/47kΩ
BAL.LINE: 180mV/55kΩ
MAIN-IN: 450mV/47kΩ
Output voltageRECOUT: 180mV, PRE OUT: 1V
Frequency responsePHONO: 20Hz to 20kHz (±0.5dB)
LINE: 20Hz to 100kHz (+0, -3.0dB)
Total harmonic distortion0.007% or less (8Ω, 1kHz)
0.02% or less (8Ω, 20Hz to 20kHz)
S/N ratio (IHF-A)PHONO (MM): 91dB or more,
PHONO (MC): 75dB or more
LINE: 105dB or more
Volume adjustmentNew LECUA1000
Amplification circuitODNF 4.0
Output configurationBipolar parallel push-pull
Damping factor200
Max. amount of tone controlBASS: ±8dB at 100Hz
TREBLE: ±8dB at 10kHz
Power supply230V~(50Hz) / 115V~(60Hz)
Power consumption230W
170W (under no signal), 0.5W (at standby)
External dimensions440(W) x 178(H) x 454(D) mm
front side knob of 20mm and rear side terminal
of 27mm included in depth
Net weight24.3kg (main unit)
AccessoriesRemote control (RA-17A)
Power cable
Speaker terminal Supported Y-lug terminal dimensionWidth of part a: 15mm or less
Width of part b: 8mm or more
* Connection may not be performed
depending on the shape of the
Y-lug terminal.
Khuyến mãi


Amply Luxman L-550AXII

148,000,000đ

Amply Luxman L-509X

238,000,000đ
Thông số sản phẩm

THÔNG SỐ KỸ THUẬT :

Rated output120W + 120W (8Ω),
220W + 220W (4Ω)
Input sensitivity/input impedancePHONO (MM): 2.5mV/47kΩ
PHONO (MC): 0.3mV/100Ω
LINE: 180mV/47kΩ
BAL.LINE: 180mV/55kΩ
MAIN-IN: 1.1V/47kΩ
Output voltageREC OUT: 180mV, PRE-OUT: 1V
Frequency responsePHONO: 20Hz to 20kHz (±0.5dB)
LINE: 20Hz to 100kHz (within -3dB)
Total harmonic distortion0.007% or less (8Ω, 1kHz)
0.06% or less (8Ω, 20Hz to 20kHz)
S/N ratio (IHF-A)PHONO (MM): 91dB or more
PHONO (MC): 75dB or more
LINE: 105dB or more
Volume adjustmentNew LECUA1000
Amplification circuitODNF 4.0
Output configurationBipolar 4-parallel push-pull
Damping factor370
Max. amount of tone controlBASS: ±8dB at 100Hz
TREBLE: ±8dB at 10kHz
Power supply230V~(50Hz) /115V~(60Hz)
Power consumption380W
150W (under no signal),
0.5W (at standby)
External dimensions440(W) x 193(H) x 463(D) mm
front side knob of 20mm
and rear side terminal of 37mm included in depth
Net weight29.3kg (main unit)
AccessoriesRemote control (RA-17A)
Power cable
Speaker terminal Supported Y-lug terminal dimensionWidth of part a: 16mm or less
Width of part b: 7mm or more
* Connection may not be performed
depending on the shape of the
Y-lug terminal.
Khuyến mãi


Amply Luxman L-509X

238,000,000đ

ROTEL MICHI X3 SERIES 2

147,870,000đ
Thông số sản phẩm

THÔNG SỐ KỸ THUẬT:

 

DIMENSIONS (W × H × D)
485 x 150 x 452mm
19" × 6" × 17 3/4"

FRONT PANEL HEIGHT
132 mm (5.25")

POWER REQUIREMENTS
230V, 50Hz

POWER CONSUMPTION
500W

STANDBY POWER CONSUMPTION
Normal: <0.5W
Network Wakeup: <2W 

NET WEIGHT
28.9kg (63.7 lbs.)

BTU RATING
1303 BTU/h
MAXIMUM POWER OUTPUT
350W/Ch (4Ω)

CONTINUOUS POWER OUTPUT
200W/Ch (8Ω)

TOTAL HARMONIC DISTORTION (THD)
<0.008%

FREQUENCY RESPONSE
Line Level Inputs: 10Hz - 100kHz (+0dB, -0.4dB)
Digital Inputs: 20Hz - 20kHz (0 ± 0.4dB)
Phono Input: 20Hz - 20kHz (+0dB, +0.4dB)

S/N RATIO (IHF "A" Weighted)
Line Level Inputs: 102dB
Digital Inputs: 102dB
Phono Input: 80dB
INTERMODULATION DISTORTION (60Hz:7kHz, 4:1)
<0.03%

DAMPING FACTOR (20Hz - 20kHz, 8Ω)
350

CHANNEL SEPARATION
>55dB

INPUT SENSITIVITY
Line Level Inputs (RCA): 340mV
Line Level Inputs (XLR): 540mV
Phono Input (MM): 5.2mV

INPUT IMPEDANCE
Line Level Inputs (RCA): 100kΩ
Line Level Inputs (XLR): 100kΩ
Digital Inputs: 75Ω
Phono Input (MM): 47kΩ

INPUT OVERLOAD
Line Level Inputs (RCA): 3.5V
Line Level Inputs (XLR): 5.5V
Phono Input: 60mV

PREOUT LEVEL
1.9V

OUTPUT IMPEDANCE
100Ω

TONE CONTROLS
±10dB at 100Hz / 10kHz

COAX/OPTICAL DIGITAL INPUT SIGNALS
SPDIF LPCM (Up to 24-bit/192kHz)

PC-USB
USB Audio Class 1 (up to 24-bit/96kHz)
USB Audio Class 2 (up to 24-bit/384kHz)*
*Driver installation required
DSD and DoP support
MQA and MQA Studio support
Roon Tested support
Khuyến mãi


ROTEL MICHI X3 SERIES 2

147,870,000đ

ROTEL MICHI X5 SERIES 2

203,970,000đ
Thông số sản phẩm

THÔNG SỐ KỸ THUẬT: 

DIMENSIONS (W × H × D)
485 x 195 x 452mm
19" ×  7 5/8" × 17 3/4"

FRONT PANEL HEIGHT
177 mm (7")

POWER REQUIREMENTS
230V, 50Hz

POWER CONSUMPTION
850W

STANDBY POWER CONSUMPTION
<0.5W

NET WEIGHT
43.8kg (96.56 lbs.)

BTU RATING
2194 BTU/h
CONTINUOUS POWER OUTPUT
600W/Ch (4Ω)
350W/Ch (8Ω)

TOTAL HARMONIC DISTORTION (THD)
<0.009%

FREQUENCY RESPONSE
Line Level Inputs: 10Hz - 100kHz (+0 dB, -0.6 dB)
Digital Inputs: 20Hz - 20kHz (0 ± 0.4 dB)
Phono Input: 20Hz - 20kHz (+0 dB, -0.2 dB)

S/N RATIO (IHF "A" Weighted)
Line Level Inputs: 102dB
Digital Inputs: 102dB
Phono Input: 80dB
INTERMODULATION DISTORTION (60Hz:7kHz, 4:1)
<0.03%

DAMPING FACTOR (20 Hz - 20kHz, 8 ohms)
350

CHANNEL SEPARATION
>65dB

INPUT SENSITIVITY
Line Level Inputs (RCA): 380mV
Line Level Inputs (XLR): 580mV
Phono Input (MM): 5.7mV
Phono Input (MC): 570 uV

INPUT IMPEDANCE
Line Level Inputs (RCA): 100kΩ
Line Level Inputs (XLR): 100kΩ
Digital Inputs: 75Ω
Phono Input (MM): 47kΩ
Phono Input (MC): 100Ω

INPUT OVERLOAD
Line Level Inputs (RCA): 12.5V
Line Level Inputs (XLR): 12.5V
Phono Input (MM): 197mV
Phono Input (MC): 19mV

PREOUT LEVEL
1V

OUTPUT IMPEDANCE
470Ω
TONE CONTROLS
±10dB at 100Hz / 10kHz

COAX/OPTICAL DIGITAL INPUT SIGNALS
SPDIF LPCM (Up to 24-bit/192kHz)

PC-USB
USB Audio Class 1 (up to 24-bit/96kHz)
USB Audio Class 2 (up to 32-bit/384kHz)
DSD and DoP support
MQA and MQA Studio support 
Roon Tested
Khuyến mãi


ROTEL MICHI X5 SERIES 2

203,970,000đ