OUTPUT LEVEL | Nominal level: 1.55 V RMS. |
Maximum output level (balanced) : 9.6 V RMS. |
Maximum output level (unbalanced): 4.8 V RMS. |
Output impedance: 50 Ohms. |
FREQUENCY RESPONSE | These values from any level to 10 V RMS: |
+/- 0 dB, 20 Hz to 20 kHz. |
+/- 3 dB, 0.2 to 1.2 MHz. |
INPUT SENSITIVITY | Nominal level: 100 mV. |
Saturation level: 5 V RMS. |
Nominal input impedance: 39 kOhms. |
Separated input level adjustment for each of the 7 line inputs: -12 to 12 dB. |
INPUT LEVEL | Maximum input level (balanced) : 9.6 V RMS. |
Maximum input level (unbalanced): 4.8 V RMS. |
GROUP DELAY | Propagation delay <300 ns stable with frequency from DC to 200 kHz. |
DISTORTION | 1 Vrms output level, 80 KHz measurement bandwidth. |
600 ohms termination impedance. |
THD unbalanced input to unbalanced output 0.0002 % flat with frequency. |
THD balanced input to balanced output 0.0001 % flat with frequency. |
IMD unbalanced input to unbalanced output 0.0002 %. |
IMD balanced input to balanced output 0.0001 %. |
SPEED | Slew rate of the amplification stages: 2500 V/us. |
Rise time: < 400 ns. |
CROSSTALK | Separation: > 105 dB between channels. |
(20 Hz – 20 kHz). |
NOISE | Signal-to noise ratio on line input: > 120 dB (0.01 Hz – 10 MHz). |
Weighted ASA A: > 130 dB. |
POWER | Nominal line voltage: 115 V or 230 V. |
Input voltage range: +/- 15 %. |
Maximum power consumption: 70 W. |
GROUNDING | Separated ground and earth signal. |
Connection optional between earth and ground to cancel all ground loops. |
SAFETY FEATURES | Automatic switching to MUTING if the AC line drops or is interrupted. |
Automatic protection against tape loops. |
FRONT PANEL | MUTING/POWER switch control. |
VOLUME control. |
BALANCE control. |
RECORD/MENU switch. |
PHASE/EDIT switch. |
7 INPUT CONTROL switches. |
REAR PANEL | Power connector. |
Earthing post (yellow-green). |
Output connectors XLR (right and left) balanced. |
Output connectors RCA (right and left) for Tape and Line outputs. |
Signal grounding post (black). |
Input connectors XLR (right and left) balanced. |
Input connectors RCA (right and left) for Tape and line inputs. |
Link float. |
RS232 Connector. |
POWER SUPPLY CONTROLS | Main fuse (2.5 A slow-blow). |
SIZE & WEIGHT | PREAMPLIFIER: |
44 W x 16.5 H x 40 D (cm). |
20 kg. |
POWER SUPPLY: |
44 W x 16.5 H x 37.5 D (cm). |
25 kg. |