MARK LEVINSON

THÔNG SỐ KỸ THUẬT :

THÔNG SỐ KỸ THUẬT: 

“Fully discrete, direct-coupled, dual monaural class AB amplifier
-Input connectors: 1 pair balanced line-level inputs (XLR)
-1 pair single-ended line-level inputs (RCA)
-Output connectors: 2 pairs high current multi-way binding posts on all units. 
-Control connectors: 1 RS-232 port (DB-9)
-1 Ethernet port (RJ-45)
-1 USB port for firmware updates (USB-A)
-1 baseband IR input (⅛””/3.5mm phone jack)
-1 programmable 12V DC trigger output, 100mA maximum (⅛””/3.5mm phone jack)
-1 programmable 12V DC trigger input (⅛””/3.5mm phone jack)
-Power consumption: Maximum: 1000W
-On, idle (stereo mode): 90W
-On, idle (bridged mode): 70W
-Normal standby: 35W
-Power Save standby: 2W
-Green standby: <0.4W
-Dimensions (H x W x D): 5.72 x 17.25 x 20.75””: (145 x 438 x 527mm)
-Packed Dimensions (H x W x D): 13.63 x 24.25 x 29”” (346 x 616 x 737mm)
-Net Weight: 70 lbs (31.7kg)
-Packed Weight: 85 lbs (38.5kg)

THÔNG SỐ KỸ THUẬT:

Monaural Amplifier
• Input connectors: one XLR Balanced, one RCA Unbalanced
• Speaker connectors: two pairs of Hurricane loudspeaker outputs with banana-plug sockets 
(except on 230 VAC version)
• Control connectors: Ethernet, RS-232, Trigger In, Trigger Out, USB-A, Mini USB
• Rated output power: 400W RMS @ 8 ohms, 800W RMS @ 4 ohms, 20Hz to 20kHz at <0.3% 
THD, full output from 2.83VRMS
• Frequency reponse: 10Hz to 20kHz +/- 0.2dB
• Signal-to-noise ratio: >85dB, reference level 2.83 VRMS
• Input impedance: 60 kΩ balanced; 30 kΩ unbalanced
• Voltage gain: 26dB
• Input sensitivity: 2.83 VRMS output at 142mVRMS input
• Power requirements: 100V-, 120V-, 230V-; factory set for destination country, 1500W
• Dimensions (H x W x D): 7.65” x 17.75” x 19.83” (119.4 cm x 45.1 cm x 50.4 cm)
• Weight: 100 lbs (45.4kg)
• Packaged dimensions (H x W x D): 26.6’’ x 15.4’’ x 28.3’’ (675 x 390 x 720mm)
• Packaged weight: 119 lb (54.1 kg

THÔNG SỐ KỸ THUẬT: 

Dual-Monaural Amplifier
• Input connectors: one pair Balanced, one pair single-ended
• Speaker Connectors: four pairs of Hurricane loudspeaker outputs, banana-plug sockets 
per channel, except on European versions
• Control I/O: Ethernet, RS-232, Trigger In and Out, USB-A, MiniUSB
• Rated Output Power: 250 wpc RMS @ 8Ω, 20Hz to 20kHz @ <0.3% THD, full output from 
2.83VRMS
• Frequency Response: 10Hz to 20kHz ±0.2dB
• Signal-to-Noise Ratio: >85dB, reference level: 2.83 VRMS
• Input Impedance: 60 kΩ balanced; 30 kΩ unbalanced
• Voltage Gain: 26dB
• Input Sensitivity: 2.83VRMS output at 142mVRMS input
• Power Requirements: 100V~, 120V~, 230V~, factory set for destination country, 1500W
• Dimensions (H x W x D): (with feet): 7.75” (19.7cm) / (without feet): 7” x 17.75” x 20”
(19.7cm/17.8cm x 45.1cm x 50.8cm)
• Weight: 107 lbs (48.5kg)
• Packaged dimensions (H x W x D): 0.7’’ x 17.8’’ x 7.8’’ (17.8 x 451 x 197mm)
• Packaged weight: 124 lb (56.3 kg)