Thành Tiền	0đ
Tổng Tiền	0đ

Liên hệ

01 KHÁCH HÀNG CÁ NHÂN

Zalo

0903021303 - Mr. Nghĩa

Zalo

0903024775 - Mr. Phết

Zalo

0903660812 - Mr. Hùng

Zalo

0966877769 - Mr. Nam

Zalo

0797778570 - Mr. Khanh

02KHÁCH HÀNG DOANH NGHIỆP

Zalo

0903747655 - Mr. Nghĩa

Zalo

0903021303 - Mr. Nghĩa

Zalo

096687769 - Mr. Nam

03HỖ TRỢ KĨ THUẬT, BẢO HÀNH - TRẢ GÓP

Zalo

0903747655, 0966877769 - Trả góp Mpos

Zalo

0903021303 - Hỗ trợ kỹ thuật

Zalo

096687769 - Hỗ trợ kỹ thuật

Zalo

0903021303 - Kế Toán

Mua hàng 0903021303

Kỹ Thuật 0903021303 Bảo hành 0966877769

Tin tức

Tuyển dụng

HOTLINE

0903021303

Giỏ hàng

0 sản phẩm

LUXMAN

Lọc sản phẩm

Sắp xếp theo

Mới nhất Bán chạy Nổi bật Giá thấp Giá cao

Amply Luxman SQ-N150

Liên hệ

THÔNG SỐ KỸ THUẬT:

Rated output	10W+10W(6Ω)
Input sensitivity/ input impedance	PHONO (MM): 3.0mV/47kΩ PHONO (MC): 0.33mV/100Ω LINE: 180mV/47kΩ
Frequency response	PHONO: 20Hz to 20kHz (±0.5dB) LINE: 20Hz to 80kHz (within -3.0dB)
Total harmonic distortion	1% or less (1kHz, 10W/6Ω)
S/N ratio (IHF-A)	PHONO (MM): 84dB or more PHONO (MC): 64dB or more LINE: 95dB or more

Circuit	Driver :P-K split phase inversion circuit Output :Pentode power tubes
Vacuum tubes	ECC83×2, EL84×4
Power supply	230V~(50Hz) / 115V~(60Hz)
Power consumption	98W
External dimensions	297(W) x 188(H) x 251(D) mm 20mm front panel knob of and 21mm rear panel terminals are included in the depth measurement
Net weight	12.4kg (main unit)
Accessories	Remote control (RA-25), Power cable

Amply Luxman SQ-N150

Liên hệ

Amply Luxman CL-38uC

128,000,000đ

THÔNG SỐ KỸ THUẬT:

Input sensitivity/ input impedance	PHONO (MM): 2.0mV/47kΩ PHONO (MC high): 0.3mV/100Ω PHONO (MC low): 0.08mV/30Ω LINE: 190mV/50kΩ BAL.LINE: 190mV/20kΩ *2
Output/output impedance	Rated 1V/300Ω
Frequency response	PHONO: 20Hz to 20kHz (±0.5dB) LINE/BAL.LINE: 10Hz to 70kHz (within -3.0dB)
Total harmonic distortion	0.006% or less (1kHz) 0.06% or less (20Hz to 20kHz)
S/N ratio (IHF-A)	PHONO (MM): 68dB or more PHONO (MC high): 63dB or more PHONO (MC low): 60dB or more LINE/BAL.LINE: 100dB or more

Tone control	±8dB, selectable frequency range BASS: 150/300/600Hz, TREBLE: 1.5k/3k/6kHz
Low cut	30Hz(-6dB/oct.)
Circuit	SRPP
Vacuum tubes	ECC83S×3, ECC82×5
Power supply	230V~(50Hz)/115V~(60Hz)
Power consumption	35W
External dimensions	440(W) x 169(H) x 307(D) mm 19mm front panel knob of and 12mm rear panel terminals are included in the depth measurement
Net weight	13.3kg (main unit)
Accessories	Remote control (RA-19), Power cable

Amply Luxman CL-38uC

128,000,000đ

Amply Luxman MQ-88uC

Liên hệ

THÔNG SỐ KỸ THUẬT:

Rated output	25W + 25W (4Ω, 8Ω, 16Ω)
Input sensitivity	890mV/25W
input impedance	32kΩ
Frequency response	20Hz to 20kHz (+0, -0.5dB) 10Hz to 100kHz (+0, -3.0dB)
Total harmonic distortion	0.1% (1kHz/1W) 0.5% (20Hz to 20kHz/1W)
S/N ratio (IHF-A)	105dB
Circuit	Driver: Mullard, Output tubes: Triode connection
Vacuum tubes	ECC83S×2, ECC82×2, KT88×4

Power supply	230V~(50Hz)/115V~(60Hz)
Power consumption	170W, 140W (under no signal)
External dimensions	440(W) x 184(H) x 230(D) mm 17mm front panel knob of and 28mm rear panel terminals are included in the depth measurement
Net weight	16.1kg (main unit)
Accessories	Power cable
Speaker terminal Supported Y-lug terminal dimension	Width of part a: 14.5mm or less Width of part b: 7.5mm or more *Connection may be difficult depending on the shape of the Y-lug terminal.

Amply Luxman MQ-88uC

Liên hệ

Amply Luxman LX-380

168,000,000đ

THÔNG SỐ KỸ THUẬT:

Rated output	20W + 20W (6Ω), 18W + 18W (8Ω), 14W + 14W (4Ω)
Input sensitivity/input impedance (PRE OUT :1V)	PHONO (MM): 3.0mV/47kΩ PHONO (MC): 0.38mV/100Ω LINE: 180mV/47kΩ, MAIN-IN: 690mV/100kΩ
Output voltage	RECOUT: 180mV, PRE OUT: 1V
Frequency response	PHONO: 20Hz to 20kHz (±0.5dB) LINE: 20Hz to 80kHz (+0, -3.0dB)
Total harmonic distortion	1% or less (6Ω, 1kHz)
S/N ratio (IHF-A)	PHONO (MM): 84dB or more PHONO (MC): 67dB or more LINE: 95dB or more
Volume adjustment	LECUA
Circuit	Driver: Mullard, Output: beam tetrode connection
Vacuum tubes	6L6GC×4, ECC82×3

Output configuration	Push-pull
Max. amount of tone control	±8dB, turnover frequency switch-over system BASS: 150 / 300 / 600Hz, TREBLE: 1.5k / 3k / 6kHz
Power supply	230V~(50Hz) / 115V~(60Hz)
Power consumption	127W
External dimensions	440(W) x 197(H) x 403(D) mm front side knob of 25mm and rear side terminal of 28mm included in depth
Net weight	17.6kg (main unit)
Accessories	Remote controller (RA-25) Power cable
Speaker terminal Supported Y-lug terminal dimension	Width of part a: 15mm or less Width of part b: 8mm or more * Connection may not be performed depending on the shape of the Y-lug terminal.

Amply Luxman LX-380

168,000,000đ

Amply Luxman MQ-300

Liên hệ

THÔNG SỐ KỸ THUẬT:

Rated output	8W + 8W (4Ω, 8Ω,16Ω)
Input sensitivity	490mV (8Ω)
Input impedance	240kΩ
Frequency response	20Hz to 20kHz (+0.3,-1.5dB) 10Hz to 30kHz (+0.3, -3.0dB)
Total harmonic distortion	1% (1kHz, 8Ω, 1W)
S/N ratio (IHF-A)	105dB
Circuiting system	Driver: Parallel connection two stage amplification Output: Single configuration, cathod-bias circuit Whole: Non-feedback amplification

Vacuum tubes	5AR4(SOVTEK) x 2 6SN7GTB(TUNG-SOL) x 4 TA-300B(Takatsuki) x 2
Power voltage	230V~(50Hz) / 115V~(60Hz)
Power consumption	190W 190W (at no input)
External dimensions	460(W) x 237(H) x 340(D) mm rear side terminal of 36mm included in depth
Net weight	29.0kg (main unit)
Accessories	Power cable
Speaker terminal Supported Y-lug terminal dimension	Width of part a: 16mm or less Width of part b: 7mm or more * Connection may not be performed depending on the shape of the Y-lug terminal.

Amply Luxman MQ-300

Liên hệ

Amply Luxman M-10X

488,000,000đ

THÔNG SỐ KỸ THUẬT:

Rated output	150W + 150W (8Ω)/at stereo 300W + 300W (4Ω)/at stereo 600W (8Ω)/at monaural
Instantaneous max. output	1,200W + 1,200W (1Ω)/at stereo 2,400W (2Ω)/at monaural
Input sensitivity	1.24V/150W (8Ω) GAIN 29.0dB
Input impedance	Unbalanced 51kΩ Balanced 28kΩ
Frequency response	20Hz to 20kHz (+0, -0.1dB) 1Hz to 130kHz (+0, -3.0dB)
Total harmonic distortion	0.003% or less (1kHz/8Ω) 0.04% or less (20Hz to 20kHz/8Ω)
S/N ratio (IHF-A)	117dB
Amplification feedback circuit	LIFES 1.0
Output configuration	3 stage Darlington 4 paralleled push-pull
Damping factor	600

Power consumption

540W
290W (under no signal)
1.0W (at standby)

External dimensions

440(W) x 224(H) x 488(D) mm
front side knob of 2mm and rear side terminal
of 38 mm included in depth

Net weight

48.4kg

Accessories

Trigger cable (Modular/3.5mm Monaural)
Power cable

Speaker terminal
Supported Y-lug terminal
dimension

Width of part a: 15mm or less
Width of part b: 8mm or more
* Connection may not be performed
depending on the shape of the
Y-lug terminal.

Amply Luxman M-10X

488,000,000đ

Amply Luxman L-509Z

Liên hệ

THÔNG SỐ KỸ THUẬT:

Rated output	120W + 120W (8Ω) 220W + 220W (4Ω)
Input sensitivity/ input impedance	PHONO (MM): 2.5mV/47kΩ PHONO (MC-H): 0.3mV/100Ω PHONO (MC-L): 0.1mV/40Ω LINE: 180mV/47kΩ BAL.LINE: 180mV/79kΩ MAIN IN: 1.1V/47kΩ
Output voltage	PRE OUT: 1V
Frequency response	PHONO: 20Hz to 20kHz (±0.5dB) LINE: 20Hz to 100kHz (within -3dB)
Total harmonic distortion	0.007% or less (8Ω, 1kHz) 0.03% or less (8Ω, 20Hz to 20kHz)
S/N ratio (IHF-A)	PHONO (MM): 87dB or more PHONO (MC-H): 70dB or more PHONO (MC-L): 62dB or more LINE: 106dB or more
Volume adjustment	LECUA-EX
Amplification feedback circuit	LIFES 1.0
Output configuration	Bipolar 4-parallel push-pull

Damping factor	330
Max. amount of tone control	BASS: ±8dB at 100Hz TREBLE: ±8dB at 760Hz TREBLE: ±8dB at 10kHz
Power supply	230V~(50Hz) / 115V~(60Hz)
Power consumption	390W 150W (under no signal), 0.5W (at standby)
External dimensions	440(W) x 193(H) x 463(D) mm front side knob of 20mm and rear side terminal of 37mm included in depth
Net weight	29.4kg (main unit)
Accessories	Remote control (RA-17A) Power cable
Speaker terminal Supported Y-lug terminal dimension	Width of part a: 16mm or less Width of part b: 7mm or more * Connection may not be performed depending on the shape of the Y-lug terminal.

Amply Luxman L-509Z

Liên hệ

Amply Luxman L-507Z

218,000,000đ

THÔNG SỐ KỸ THUẬT:

Rated output	110W+110W（8Ω） 220W+220W（4Ω）
Input sensitivity/ input impedance	PHONO（MM）: 2.5mV / 47kΩ PHONO（MC ）： 0.3mV / 100Ω LINE: 180mV / 47kΩ BAL.LINE: 180mV / 79kΩ MAIN IN: 1.05V / 47kΩ
Output voltage	PRE OUT: 1V
Frequency response	PHONO: 20Hz to 20kHz (±0.5dB) LINE: 20Hz to 100kHz (within -3dB)
Total harmonic distortion	0.007% or less (8Ω, 1kHz) 0.03% or less (8Ω, 20Hz to 20kHz)
S/N ratio (IHF-A)	PHONO (MM): 91dB or more PHONO (MC): 75dB or more LINE: 105dB or more
Volume adjustment	New LECUA1000
Amplification feedback circuit	LIFES 1.0
Output configuration	Bipolar 3-parallel push-pull
Damping factor	300

Max. amount of tone control

BASS: ±8dB at 100Hz
TREBLE: ±8dB at 10kHz

Power supply

230V~(50Hz) / 115V~(60Hz)

Power consumption

350W
886W (under no signal), 0.4W (at standby)

External dimensions

440(W) x 178(H) x 454(D) mm
front side knob of 20mm and rear side terminal
of 27mm included in depth

Net weight

25.4kg (main unit)

Accessories

Remote control (RA-17A)
Power cable

Speaker terminal
Supported Y-lug terminal
dimension

Width of part a: 15mm or less
Width of part b: 8mm or more
* Connection may not be performed
depending on the shape of the
Y-lug terminal.

Amply Luxman L-507Z

218,000,000đ

Amly Luxman L-595ASE

308,000,000đ

THÔNG SỐ KỸ THUẬT:

Rated output	30W + 30W (8Ω), 60W + 60W (4Ω)
Input sensitivity / input impedance	PHONO (MM) : 2.5mV / 47kΩ PHONO (MC) : 0.3mV / 100Ω LINE : 180mV / 47kΩ BAL.LINE : 180mV / 55kΩ MAIN IN : 550mV / 47kΩ
Output voltage / output impedance	PRE OUT: 1V / 600kΩ
Frequency response	PHONO: 20Hz to 20kHz (±0.5dB) LINE: 20Hz to 100kHz (within -3.0dB)
Total harmonic distortion	0.007% or less (8Ω, 1kHz) 0.06% or less (8Ω, 20Hz to 20kHz)
S/N ratio (IHF-A)	PHONO (MM) : 91dB or more PHONO (MC) : 75dB or more LINE : 105dB or more
Volume adjustment	New LECUA1000
Amplification circuit	ODNF-u
Output configuration	Bipolar 3-parallel push-pull
Damping factor	370
Max. amount of tone control	BASS: ±8dB at 100Hz TREBLE: ±8dB at 10kHz
Power supply	230V~(50Hz) / 115V~(60Hz)
Power consumption	330W, 230W (under no signal), 0.4W (at standby)
External dimensions	440 (W) x 193 (H) x 462 (D) mm front side knob of 19mm and rear side terminal of 36mm included in depth
Net weight	29.0kg (main unit)
Accessories	Remote control (RA-17A)
Speaker terminal Supported Y-lug terminal dimension	Width of part a: 16mm or less Width of part b: 7mm or more * Connection may not be performed depending on the shape of the Y-lug terminal.

* Setting the phase inverter switch to the B position allows balance input terminal No 2 to change to HOT, and No. 3 to COLD.

* Volume mute, monaural and subsonic functions can be turned on and off with remote control

* Specifications and appearance are subject to change without notice.

* The products listed in this catalog do not include line cables. Please purchase cables separately.

Amly Luxman L-595ASE

308,000,000đ

Amply Luxman L-590AXII

218,000,000đ

THÔNG SỐ KỸ THUẬT : 

Rated output	30W + 30W (8Ω), 60W + 60W (4Ω)
Input sensitivity/input impedance	PHONO (MM): 2.5mV/47kΩ PHONO (MC): 0.3mV/100Ω LINE: 180mV/47kΩ BAL.LINE: 180mV/55kΩ MAIN-IN: 550mV/47kΩ
Output voltage	RECOUT: 180mV, PRE OUT: 1V
Frequency response	PHONO: 20Hz to 20kHz (±0.5dB) LINE: 20Hz to 100kHz (+0, ±3.0dB)
Total harmonic distortion	0.005% or less (8Ω, 1kHz) 0.02% or less (8Ω, 20Hz to 20kHz)
S/N ratio (IHF-A)	PHONO (MM): 91dB or more,PHONO (MC): 75dB or more LINE: 107dB or more
Volume adjustment	New LECUA1000
Amplification circuit	ODNF 4.0

Output configuration	Bipolar 3-parallel push-pull
Damping factor	320
Max. amount of tone control	BASS: ±8dB at 100Hz TREBLE: ±8dB at 10kHz
Power supply	230V~(50Hz) / 115V~(60Hz)
Power consumption	330W 260W (under no signal), 0.5W (at standby)
External dimensions	440(W) x 193(H) x 463(D) mm front side knob of 20mm and rear side terminal of 37mm included in depth
Net weight	28.4kg (main unit)
Accessories	Remote controller (RA-17A) Power cable
Speaker terminal Supported Y-lug terminal dimension	Width of part a: 16mm or less Width of part b: 7mm or more * Connection may not be performed depending on the shape of the Y-lug terminal.

Amply Luxman L-590AXII

218,000,000đ

Amply Luxman L-550AXII

148,000,000đ

THÔNG SỐ KỸ THUẬT:

Rated output	20W + 20W (8Ω), 40W + 40W (4Ω)
Input sensitivity / input impedance	PHONO (MM): 2.5mV/47kΩ PHONO (MC): 0.3mV/100Ω LINE: 180mV/47kΩ BAL.LINE: 180mV/55kΩ MAIN-IN: 450mV/47kΩ
Output voltage	RECOUT: 180mV, PRE OUT: 1V
Frequency response	PHONO: 20Hz to 20kHz (±0.5dB) LINE: 20Hz to 100kHz (+0, -3.0dB)
Total harmonic distortion	0.007% or less (8Ω, 1kHz) 0.02% or less (8Ω, 20Hz to 20kHz)
S/N ratio (IHF-A)	PHONO (MM): 91dB or more, PHONO (MC): 75dB or more LINE: 105dB or more
Volume adjustment	New LECUA1000
Amplification circuit	ODNF 4.0
Output configuration	Bipolar parallel push-pull

Damping factor	200
Max. amount of tone control	BASS: ±8dB at 100Hz TREBLE: ±8dB at 10kHz
Power supply	230V~(50Hz) / 115V~(60Hz)
Power consumption	230W 170W (under no signal), 0.5W (at standby)
External dimensions	440(W) x 178(H) x 454(D) mm front side knob of 20mm and rear side terminal of 27mm included in depth
Net weight	24.3kg (main unit)
Accessories	Remote control (RA-17A) Power cable
Speaker terminal Supported Y-lug terminal dimension	Width of part a: 15mm or less Width of part b: 8mm or more * Connection may not be performed depending on the shape of the Y-lug terminal.

Amply Luxman L-550AXII

148,000,000đ

Amply Luxman L-509X

238,000,000đ

THÔNG SỐ KỸ THUẬT :

Rated output	120W + 120W (8Ω), 220W + 220W (4Ω)
Input sensitivity/input impedance	PHONO (MM): 2.5mV/47kΩ PHONO (MC): 0.3mV/100Ω LINE: 180mV/47kΩ BAL.LINE: 180mV/55kΩ MAIN-IN: 1.1V/47kΩ
Output voltage	REC OUT: 180mV, PRE-OUT: 1V
Frequency response	PHONO: 20Hz to 20kHz (±0.5dB) LINE: 20Hz to 100kHz (within -3dB)
Total harmonic distortion	0.007% or less (8Ω, 1kHz) 0.06% or less (8Ω, 20Hz to 20kHz)
S/N ratio (IHF-A)	PHONO (MM): 91dB or more PHONO (MC): 75dB or more LINE: 105dB or more
Volume adjustment	New LECUA1000
Amplification circuit	ODNF 4.0

Output configuration	Bipolar 4-parallel push-pull
Damping factor	370
Max. amount of tone control	BASS: ±8dB at 100Hz TREBLE: ±8dB at 10kHz
Power supply	230V~(50Hz) /115V~(60Hz)
Power consumption	380W 150W (under no signal), 0.5W (at standby)
External dimensions	440(W) x 193(H) x 463(D) mm front side knob of 20mm and rear side terminal of 37mm included in depth
Net weight	29.3kg (main unit)
Accessories	Remote control (RA-17A) Power cable
Speaker terminal Supported Y-lug terminal dimension	Width of part a: 16mm or less Width of part b: 7mm or more * Connection may not be performed depending on the shape of the Y-lug terminal.

Amply Luxman L-509X

238,000,000đ

Ampli LUXMAN L-505UXII

118,000,000đ

Rated output	100W + 100W (8Ω), 150W + 150W (4Ω)
Input sensitivity/input impedance	PHONO (MM): 2.5mV/47kΩ PHONO (MC): 0.3mV/100Ω LINE: 180mV/47kΩ BAL.LINE: 180mV/55kΩ MAIN-IN: 1V/47kΩ
Output voltage	REC OUT: 180mV, PRE-OUT: 1V
Frequency response	PHONO: 20Hz to 20kHz (within -3dB) LINE: 20Hz to 100kHz (within -3dB)
Total harmonic distortion	0.009% or less (8Ω, 1kHz) 0.09% or less (8Ω, 20Hz to 20kHz)
S/N ratio (IHF-A)	PHONO (MM): 91dB or more PHONO (MC): 75dB or more LINE: 104dB or more
Volume adjustment	LECUA
Amplification circuit	ODNF 4.0

Output configuration	Bipolar parallel push-pull
Damping factor	210
Max. amount of tone control	BASS: ±8dB at 100Hz TREBLE: ±8dB at 10kHz
Power supply	230V~(50Hz) / 115V~(60Hz)
Power consumption	270W 85W (under no signal), 0.4W (at standby)
External dimensions	440(W) x 178(H) x 454(D) mm front side knob of 20mm and rear side terminal of 27mm included in depth
Net weight	22.5kg (main unit)
Accessories	Remote control (RA-17A) Power cable
Speaker terminal Supported Y-lug terminal dimension	Width of part a: 15mm or less Width of part b: 8mm or more * Connection may not be performed depending on the shape of the Y-lug terminal.